Close-up of the tops of a 2.50mm 'W' section galvanised palisade fence.
Rear view of the top section of a 2.5mm 'W' section galvanised palisade fence showing the 8mm dia. rivets used to secure the pales and the security shear nuts used to secure the support rails to the fence posts.


Close-up of the tops of a 3mm 'D' section galvanised palisade fence.
1.80 metre high galvanised steel palisade fencing.


3.00 metre high, 2.50mm 'W' section, galvanised palisade fencing with a concrete sill at the base of the palisade pales.
2.40 metre high, 2.50mm 'W' section galvanised steel palisade fencing. This fence was positioned at the back of an old chainlink security fence with the gap between the two fences being filled with 2no. 960mm dia. coils of concertina razor wire.


1.80 metre high, green power coated palisade fencing surrounding a school play area.
1.80 metre high, green powder coated, 3mm 'D'  section palisade fence. 


Close-up of the top section of some blue powder coated, 2.5mm 'W' section palisade fencing.
 2.40 metre high, blue powder coated palisade fencing supported on posts with a bolt-down base plate.


3.60 metre high, green powder coated steel palisade fencing.
An end section of palisade fence manufactured to fill the gap between the end of the palisade fence and a sloping stone wall.


Galvanised and green powder coated palisade quadrant fence panel at the end of a section of palisade fencing.
Close up of base plate and expansion bolt fixing of palisade fencing to concrete floor.


Close-up of a 8mm palisade pale rivet fixing and a security shear nut fence panel fixing.
1.80 metre high galvanised palisade fence compound around an LPG gas storage container.

 Copyright (c) 2000 - 2004  Charles Spink & Sons (Security Fencing) Ltd. ALL RIGHTS RESERVED
This site was last updated 5th January, 2004.
All images contained within the pages of this web site are the property of Charles Spink & Sons (Security Fencing) Ltd. Their business, publication and promotional use by all other companies and individuals is strictly prohibited. All trademarks are acknowledged to their respective owners